**Please note the small chip in the glass on the upper portion of the prism as noted in the photos. This will not affect the performance or accuracy of the prism.**
For efficient operation without the need for directing the prism toward the instrument, a 360° type prism is recommended. This consists of six individual prisms joined together. The arrangement allows the measuring beam to reflect directly back to its source evenly from any position on the prism set. The even distribution of the prisms provides similar offset and accuracy readings from any side.
This reflector is recommended for all robotic work performed with a survey pole. The rubber mountings on the top and bottom of the prisms provide protection if the pole falls over. The prism is supplied in a padded case for safe transportation.
The GRZ4 has an overall pointing accuracy of 5mm. However, when aiming directly at one of the three prisms, indicated by yellow arrows, an accuracy of better than 2mm can be achieved.
Molded into a fiber-reinforced housing. -11 mm offset with Leica mounting stud. Leica prisms "snap on" to Leica prism poles such as the GLS11.