SubSurface ML-3S Magnetic Locator
SubSurface ML-3S Magnetic Locator (EA)
In Stock
Authorized DealerSubSurface ML-3S WaterproofSubSurface ML-3S Pressure Test |
||||||||||||
) |
||||||||||||
| Click on the image for a larger view. | ||||||||||||
|
||||||||||||
;)
;)
;)
;)
ML-3 Magnetic Locator Offering Durable, One-Handed Operation that’s 100% Waterproof
The ML-3 is 40” to meet utility and surveyor personal preferences, providing ergonomic, rugged, one-handed
operation. The ML-3 offers unparalleled durability and is housed inside aircraft-grade aluminum mono-tube. The ML-3 is digitally tuned and 100 percent waterproof. It’s rating is IP68 certified up to 250 feet - a first for the industry - so it can be used in inclement weather and submerged conditions. Plus, its auto-zero feature allows the user to “cancel” ambient magnetics or magnetic gradient in the
environment.
KEY FEATURES
● Easy and simple one-hand operation; built-in handle
● Easy to learn; 3 keypad switches: on/off and volume, sensitivity up and sensitivity down
● Volume built into the on/off key; just hold down the key while it cycles through the settings
● The electronic keypad “clicks” when a key is depressed. A “real” speaker is in the front panel, providing outstanding volume.
● Microprocessor remembers the volume and gain settings from the last time the unit was on Non-metered (ML-1) and metered (ML-1M) versions are designed to look, feel and operate the same
● Strong aluminum monotube construction from the tip through the end of the handle and ABS injection-molded electronics case (3 ¼” tapered to 2 ½”-wide X 4 ½” tapered to 2 ½”-deep) provide the best structural integrity in a hand-held locator.
● Lightweight; only about two pounds including batteries
● Uses 2 regular alkaline 9-volt batteries, parallel; the unit is shipped with two spare batteries
● Soft pack carrying case included (optional hard case available) Battery compartment separated from electronic components and the circuit board. No exposing electronics to replace the batteries.
● Easy and simple one-hand operation; built-in handle
● Easy to learn; 3 keypad switches: on/off and volume, sensitivity up and sensitivity down
● Volume built into the on/off key; just hold down the key while it cycles through the settings
● The electronic keypad “clicks” when a key is depressed. A “real” speaker is in the front panel, providing outstanding volume.
● Microprocessor remembers the volume and gain settings from the last time the unit was on Non-metered (ML-1) and metered (ML-1M) versions are designed to look, feel and operate the same
● Strong aluminum monotube construction from the tip through the end of the handle and ABS injection-molded electronics case (3 ¼” tapered to 2 ½”-wide X 4 ½” tapered to 2 ½”-deep) provide the best structural integrity in a hand-held locator.
● Lightweight; only about two pounds including batteries
● Uses 2 regular alkaline 9-volt batteries, parallel; the unit is shipped with two spare batteries
● Soft pack carrying case included (optional hard case available) Battery compartment separated from electronic components and the circuit board. No exposing electronics to replace the batteries.
TECHNICAL SPECIFICATIONS
Overall Length
40 in (101.6 cm)
Weight
1.8 lbs (0.8 kg)
Input Power
Three (3) standard 9-volt alkaline batteries
Battery Life
≈ 40 Hours
Frequency
16.5 kHz
Audio
Speaker pitch increases in frequency proportional to gradient field intensity
Visual
LCD display with a bar graph indicating polarity and relative strength of the signal. Also, provides low battery indication.
Operating Temperature
-13° to 140° F (-25° to 60° C)
Ingress Protection
IP68 Certified up to 250 feet
Exterior Sensor Tube
Aircraft grade aluminum
Warranty
7 Years
Shipping
Dimensions: 44" x 4" x 4" Weight: 4 Lbs.
Overall Length
40 in (101.6 cm)
Weight
1.8 lbs (0.8 kg)
Input Power
Three (3) standard 9-volt alkaline batteries
Battery Life
≈ 40 Hours
Frequency
16.5 kHz
Audio
Speaker pitch increases in frequency proportional to gradient field intensity
Visual
LCD display with a bar graph indicating polarity and relative strength of the signal. Also, provides low battery indication.
Operating Temperature
-13° to 140° F (-25° to 60° C)
Ingress Protection
IP68 Certified up to 250 feet
Exterior Sensor Tube
Aircraft grade aluminum
Warranty
7 Years
Shipping
Dimensions: 44" x 4" x 4" Weight: 4 Lbs.
View/Download SubSurface
Customers who bought this item also bought