SmartTool 24" Smart Level 92288 (ea)
SmartTool 24" Smart Level 92288 (ea)
FLT P/N #:SMR92288 In Stock
$221.74 Your Price: $159.95
The M-D Building Products SmartTool 24" Smart Level digital level finds level and plumb in two ways. For quick reference, use the sensitive acrylic bubbles. For high precision, use the digital display with amazing accuracy within 0.1 degrees. When not utilizing plumb or level, the SmartTool 24" Smart Level quickly identifies any angle in 3 different modes: degrees, % slope and pitch. Manufactured by M-D Building Products.
• Aluminum box frame
• Built-in acrylic bubble vials
• Listen & Level: audible tone alerts you when level or plumb is reached
• Hold Button: freezes any reading and can be converted from one mode to another
• Displays pitch to 1/10 degree
• Always Accurate: can be re-calibrated at the touch of a button
• Includes standard 9 volt battery
• Module can be used alone or with
• Use with regular or magnetic
• Stair rails
If you can imagine times you'd like to have both a small digital torpedo level and a longer level, the SmartTool Module fills the need. The SmartTool Module can be used as a stand alone level or it can be placed in the optional American I-beam level in lengths of 24 inches, 48 inches or 96 inches. M-D's top-quality red aluminum I-beam levels have been assured of excellence among construction professionals for more than three-quarters of a century. Easily attached or removed using only a screwdriver or coin, the versatility of this product can be appreciated in almost any application. The simple, Smart Level patented field calibration procedure can be performed using one button, any reasonably level surface, and just a couple of minutes. When used with the optional magnetic bracket, the Smart Level Module will stay on saw blades, metal pipes, buildings, machinery or anything made of iron or steel allowing hands free measurement.
Smart Level is simple to use. Just press the on/off button and Smart Level will show you the angle of any surface with decimal-point accuracy. The display even flips over with the level so SmartTool always reads right side up And it shuts off automatically after 6 minutes when it's not being used, all this from a standard, 9-volt battery. And, SmartTool can take abuse other levels can't, because its components are made of high strength materials and you can reset it to factory accuracy with the touch of a button.
• Simple to use
Smart Level permits you to find level and plumb in two ways. For quick references, use the sensitive bubble vials. For highly precise work, use the digital display on the Sensor Module. It provides accuracy to 1/10 of a degree. But the real advantage of the SmartTool is that it also reads all the other angles bubble vials don't. So when you are not dealing with level or plumb, SmartTool quickly tells what the angle is and what the angle needs to be. And only Smart Level allows you to measure angles three different ways: degrees, percent slope, and pitch (rise over run).
• Read in Degrees
Set saw blade angles to a fraction of degree accuracy with Smart Level. Assure there is no gap when you join 2 cuts together with .1 degree accuracy. You can easily duplicate a stair angle for setting handrails and never again will you be measuring top and bottom to make sure stair treads and rails are parallel.
• Percent Slope and Pitch
In the percent slope mode the Smart Level allows you to read angles to meet requirements for sewer connections, ADA ramps, and grading. And showing compliance is merely a matter of pointing to the display. SmartTool also gives you roof pitch readings -- in inches of rise per foot of run -- right on the display. No two-handed measurements, no conversion calculations, and no mistakes.
• Listen and Level Audio Feature
Have tasks where you really can't see the SmartTool but need instant feedback? Then turn on the audio beeper. When turned on with a single button, SmartTool lets you hear when your task is at level or plumb. This can be great when shimming projects, leveling buildings, pool tables or other projects where you need immediate feedback but are not in a position to see the display. This can leave your hands free to adjust, nail, or screw the project in place when you hear the beep telling you it is where you want it.
The hold button makes it easy to measure in areas where the digital display is not visible. Take the measurement, push the hold button, and then bring the SmartTool in front of you to see your reading.
View/Download Smart Level Brochure
Customers who bought this item also bought